Digital Approaches in Complete Denture Applications

dijital-prosthetic-dentistry

Bilge Çokoy1, Zeynep Şahin2
1Doctoral Student, Department of Prosthodontics, Faculty of Dentistry, Lokman Hekim University, Çankaya, Ankara, Türkiye
2Assistant professor, Department of Prosthodontics, Faculty of Dentistry, Lokman Hekim University, Çankaya, Ankara, Türkiye

ABSTRACT
The loss of teeth is a significant factor affecting both quality of life and overall health. With the rapid ad-vancement of technology, dentistry has embraced digital prosthetics. Moving away from traditional molding, complete dentures produced through subtractive manufacturing and additive manufacturing have gained prominence. Subtractive manufacturing involves carving the prosthesis from a material block, offering cost advantages but presenting challenges like clinical fit issues. On the other hand, additive manufacturing pro-vides benefits such as cost reduction and detailed production. Despite the advantages and disadvantages of both methods, selecting the appropriate one is crucial, considering application requirements and patient characteristics. This digital approach marks a substantial step, aiming to reduce costs, minimize appoint-ments, and provide comfortable treatment, particularly for elderly patients.
Keywords: CAD-CAM, Printing, Three-Dimensional, Denture, Complete Tooth Loss

Referanslar

  1. Akın C, Mutlu ŞN, Güntekin N. Yetişkin Hastalarda Ar-tan Yaş ile Diş Kaybı Şiddetinin İlişkisi. NEU Dent J. 2020;2(2):64-68.
  2. Ishida Y, Kuwajima Y, Kobayashi T, Yonezawa Y, Asack D, Nagai M, et al. Current implementation of digital dentistry for removable prosthodontics in US Dental Schools. Int J Dent. 2022;2022
  3. Duret F, Preston J. CAD/CAM imaging in dentistry. Cur Opin Dent. 1991;1(2):150-154.
  4. Bonita R, Beaglehole R, Kjellström T. Epidemiology and prevention: chronic noncommunicable diseases. Basic epi-demiology 2nd ed, WHO. 2006:99-115.
  5. John AV, Abraham G, Alias A. Two-visit CAD/CAM milled dentures in the rehabilitation of edentulous arches: A case series. J. Indian Prosthodont. Soc. 2019;19(1):88.
  6. The Glossary of Prosthodontic Terms: Ninth Edition, J Pros-thet Dent. 2017;May 117(5S):e1-e105.
  7. Marinello CP, Brugger R. Digital Removable Complete Den-ture-An Overview. Current Oral Health Reports. 2021;1-15.
  8. Al-Rafee MA,. The epidemiology of edentulism and the associated factors: A literature Review. J Family Med Prim Care. 2020;9(4): 1841.
  9. Sağlık B. Türkiye Ağız Diş Sağlığı Profili Araştırma Raporu. 2018.
  10. Thompson GW, Kreisel PSJ. The impact of the demograph-ics of aging and the edentulous condition on dental care ser-vices. J Prosthet Dent. 1998;79(1), 56-59.
  11. Grant GT, Campbell SD, Masri RM, Andersen MR. Glossary of digital dental terms: American College of Prosthodontists. J Prosthet Dent. 2016;25(S2):S2-S9.
  12. Sri H, Maiti S, Sasanka K. Knowledge, attitude, and practice of digital dentures among dentists. J. Adv. Pharm. Technol. Res. 2022;13 (2):519.
  13. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: con-cepts and clinical methods of obtaining required morpholog-ical data. J Prosthet Dent. 2012;107(1):34-46.
  14. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrica-tion of complete dentures. Int J Prosthodont. 1994;7(1)
  15. Kawahata N, Ono H, Nishi Y, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/CAM. J Oral Rehabil. 1997;24(7):540-548.
  16. Steinmassl P-A, Wiedemair V, Huck C, et al. Do CAD/CAM dentures really release less monomer than conventional den-tures? Clin Oral Invest. 2017;21:1697-1705.
  17. Alan CB. CAD/CAM Tekniği İle Üretilen Tam Protezler. 2020.
  18. Süleyman F, Ali MC, Duymuş ZY. Diş Hekimliğinde Yeni Teknolojik Uygulamalar. Sağlık&Bilim 2022: Medikal Araştırmalar-IV. 2023:7.
  19. Mert D, Kamnoedboon P, Husain NA-H, Özcan M, Srini-vasan M. CAD-CAM complete denture resins: Effect of re-lining on the shear bond strength. J Dent. 2023;131:104438.
  20. You S-G, You S-M, Kang S-Y, Bae S-Y, Kim J-H. Evaluation of the adaptation of complete denture metal bases fabricated with dental CAD-CAM systems: An in vitro study. J Prosthet Dent. 2021;125(3):479-485.
  21. Kalaycı BB, Bayındır F. Güncel Dental Bilgisayar Destekli Tasarım/Bilgisayar Destekli Üretim Sistemleri. J Dent Fac Ataturk Univ. 2015;25:129-136.
  22. Şahin Z, Ergün G, Ataol AS. CAD/CAM ile üretilmiş PEEK ve PMMA ile geleneksel protez kaide materyallerinin bazı fiziksel özelliklerinin karşılaştırılması. Mersin Univ. Saglik Bilim. Derg. 2021;14(3):484-494.
  23. Zeidan AAE-l, Abd Elrahim RA, Abd El Hakim AF, Harby NM, Helal MA. Evaluation of surface properties and elastic modulus of CAD-CAM Milled, 3D printed, and compression moulded denture base resins: An in vitro study. J Int Soc Prev Community Dent. 2022;12(6):630.
  24. Soeda Y, Komagamine Y, Kanazawa M, Hada T, Iwaki M, Minakuchi S. Trueness and precision of artificial teeth in CAD-CAM milled complete dentures from custom disks with a milled recess. J Prosthet Dent. 2022.
  25. Kanazawa M, Inokoshi, M., Minakuchi, S. Trial of a CAD/CAM system for fabricating complete dentures. Dent Mater 2011;30(1), 93-96.
  26. Yamamoto S, Kanazawa M, Hirayama D, Nakamura T, Arakida T, Minakuchi S. In vitro evaluation of basal shapes and offset values of artificial teeth for CAD/CAM complete dentures. Comput Biol Med. 2016;68:84-89.
  27. Yamamoto S, Kanazawa M, Iwaki M, Jokanovic A, Mi-nakuchi S. Effects of offset values for artificial teeth posi-tions in CAD/CAM complete denture. Comput Biol Med. 2014;52:1-7.
  28. Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral set-ting. J Prosthet Dent. 2015;114(6):818-825.
  29. Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Com-parison of denture base adaptation between CAD-CAM and conventional fabrication techniques. J Prosthet Dent. 2016;116(2):249-256.
  30. Baumgaertel S, Palomo JM, Palomo L, Hans MG. Reliabili-ty and accuracy of cone-beam computed tomography dental measurements. Am J Orthod Dentofac. 2009;136(1):19-25.
  31. Kanazawa M, Iwaki M, Arakida T, Minakuchi S. Digital im-pression and jaw relation record for the fabrication of CAD/CAM custom tray. J Prosthodont Res. 2018;62(4):509-513.
  32. Soeda Y, Kanazawa M, Arakida T, Iwaki M, Minakuchi S. CAD-CAM milled complete dentures with custom disks and prefabricated artificial teeth: A dental technique. J Prosthet Dent. 2022;127(1):55-58.
  33. Choi JJE, Uy CE, Plaksina P, Ramani RS, Ganjigatti R, Waddell JN. Bond strength of denture teeth to heat-cured, CAD/CAM and 3D printed denture acrylics. J Prosthet Dent. 2020;29(5):415-421.
  34. Iwaki M, Kanazawa M, Arakida T, Minakuchi S. Mechani-cal properties of a polymethyl methacrylate block for CAD/CAM dentures. J Oral Sci. 2020;62(4):420-422.
  35. Yüksel Y, Şen DDN. Diş Hekimliğinde Dijital Dönüşüm ve Protetik Diş Tedavisinde Uygulama Alanları. 2018.
  36. Yöndem İ. Aykent F. Bilgisayar Desteği İle Hazırlanan Dental Seramikler (CAD/CAM). Hacettepe Diş Hek Derg. 2008;32:79-8
  37. Tasaka A, Matsunaga S, Odaka K, Ishizaki K, Ueda T, Abe S, et al. Accuracy and retention of denture base fabricated by heat curing and additive manufacturing. J Prosthodont Res. 2019;63(1):85-89.
  38. Fournier G, Savall F, Galibourg A, Gély L, Telmon N, Maret D. Three-dimensional analysis of bitemarks: a vali-dation study using an intraoral scanner. Forensic Sci Int. 2020;309:110198.
  39. Zimmermann M, Mehl A, Mörmann W, Reich S. Intraoral scanning systems-a current overview. Int J Comput Dent. 2015;18(2):101-129.
  40. Punj A, Bompolaki D, Garaicoa J. Dental impression materi-als and techniques. Dent Clin. 2017;61(4):779-796.
  41. Al-Dwairi ZN, Tahboub KY, Baba NZ, Goodacre CJ. A com-parison of the flexural and impact strengths and flexural mod-ulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (PMMA). J Prosthet Dent. 2020;29(4):341-349.
  42. Nadim Z. Baba, Charles J. Goodacre,  Mathew T. Katta-diyil CAD/CAM Removable Prosthodontics. In:  Masri R, Driscoll CF, eds. Clinical applications of digital dental tech-nology. 1st ed. Wiley Online Library, 2015. p. 107-138.
  43. Mangano F, Gandolfi A, Luongo G, Logozzo S. Intraoral scanners in dentistry: a review of the current literature. BMC Oral Health. 2017;17(1):1-11.
  44. Davidowitz G, Kotick PG. The use of CAD/CAM in dentist-ry. Dent Clin. 2011;55(3):559-570.
  45. Christensen GJ. Computerized restorative dentistry: state of the art. J Am Dent Assoc. 2001;132(9):1301-1303.
  46. Türk AG, Dündar Çömlekoğlu M, Çömlekoğlu ME. Ekle-meli Bilgisayar Destekli Üretim Yöntemleri. Ege Üniv Diş Hekim Fak Derg. 2022;43(Supp: Ozel Sayi):85-94.
  47. Principles AMG. Part 2: Overview of Process Categories and Raw Materials, document ISO 17296-2: 2015. Internation-al Organization for Standardization, Geneva, Switzerland. 2015.
  48. Raszewski Z, Chojnacka K, Kulbacka J, Mikulewicz M. Mechanical Properties and Biocompatibility of 3D Printing Acrylic Material with Bioactive Components. J. Funct. Bio-mater. 2022;14(1):13.
  49. Arslan B, Nalbant L, Nalbant AD, Nadirov M. Üç Boyutlu Yazıcıların Dental Kullanımında Güncel Proteti̇k Yaklaşım-lar. Atatürk Üniv Diş Hek Fak Derg. 2021;31(3):459-470.
  50. Akiyama Y, Kanazawa M, Iwaki M, Hada T, Soeda Y, et al. Fabrication of milled removable partial dentures using a cus-tom plate with prefabricated artificial teeth. J Prosthodont Res. 2023.
  51. Prpić V, Schauperl Z, Ćatić A, Dulčić N, Čimić S. Compar-ison of mechanical properties of 3D-printed, CAD/CAM, and conventional denture base materials. J Prosthet Dent. 2020;29(6):524-528.
  52. Ayman AD. The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electron physician. 2017;9(7):4766.
  53. Abdulwahhab SS. High-impact strength acrylic denture base material processed by autoclave. J Prosthodont Res. 2013;57(4):288-293.
  54. Laughlin GA, Eick JD, Glaros AG, Young L, Moore DJ. A comparison of palatal adaptation in acrylic resin denture bases using conventional and anchored polymerization tech-niques. J Prosthet Dent. 2001;10(4):204-211.
  55. Choi JJE, Ramani RS, Ganjigatti R, Uy CE, Plaksina P, Wad-dell JN. Adhesion of denture characterizing composites to heat-cured, CAD/CAM and 3D printed denture base resins. J Prosthet Dent. 2021;30(1):83-90.
  56. AlHelal A, Goodacre BJ, Kattadiyil MT, Swamidass R. Er-rors associated with digital preview of computer-engineered complete dentures and guidelines for reducing them: A tech-nique article. J Prosthet Dent. 2018;119(1):17-25.
  57. Lee HJ, Kim CW, Kim YS. The level of residual monomer in injection molded denture base materials. J Korean Acad Prosth. 2003;41(3):360-8.
  58. Urban V, Cass Q, Oliveira R, Giampaolo E, Machado AL. Development and application of methods for determina-tion of residual monomer in dental acrylic resins using high performance liquid chromatography. Biomed Chromatogr. 2006;20(4):369-376.
  59. Srinivasan M, Chien EC, Kalberer N, Caravaca AMA, Cas-telleno AL, et al. Analysis of the residual monomer content in milled and 3D-printed removable CAD-CAM complete dentures: an in vitro study. J Dent. 2022;120:104094.
  60. Vilaplana J, Romaguera C. Contact dermatitis and adverse oral mucous membrane reactions related to the use of dental prostheses. Contact dermatitis. 2000;43(3):183-185.
  61. Chebib N, Kalberer N, Srinivasan M, Maniewicz S, Per-neger T, Müller F. Edentulous jaw impression techniques: An in vivo comparison of trueness. J Prosthet Dent. 2019;121(4):623-630.
  62. Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Com-parison of denture tooth movement between CAD-CAM and conventional fabrication techniques. J Prosthet Dent. 2018;119(1):108-115.
  63. Rasaie V, Abduo J, Hashemi S. Accuracy of intraoral scan-ners for recording the denture bearing areas: a systematic review. J Prosthet Dent. 2021;30(6):520-539.
  64. Russo LL, Caradonna G, Salamini A, Guida L. Intraoral scans of edentulous arches for denture design in a single pro-cedure. J Prosthet Dent. 2020;123(2):215-219.
  65. Russo LL, Di Gioia C, Salamini A, Guida L. Integrating in-traoral, perioral, and facial scans into the design of digital dentures. J Prosthet Dent. 2020;123(4):584-588.
  66. Hobrink J, Zarb GA, Bolender CL, Eckert S, Jacob R, Fen-ton A, et al. Prosthodontic treatment for edentulous patients: complete dentures and implant-supported prostheses. Health Sci. 2003.
  67. Fang JH, An X, Jeong SM, Choi BH. Digital intraoral scanning technique for edentulous jaws. J Prosthet Dent. 2018;119(5):733-735.
  68. Ergün G, Ataol AS, Tekli B. Diş hekimliğinde robotik uygu-lamalar: Bir literatür derlemesi. Ege Üniv Diş Hek Fak Derg. 2018;39(3):125-133.